Aqara LED Strip T1
- Zigbee
Requires a compatible Aqara Zigbee hub.
$69.00
Out of stockMatter-compatible Zigbee light strip with high-quality, addressable, RGBIC LED lighting - able to display multiple colours at once.
- Secure card payment
- Visa & Mastercard
- Official Singapore sets
- Free Singapore delivery
- Local warranty
- GST-inclusive prices
Category: Smart Lighting
Vibe in every colour.
RGBIC colour, tunable white and music-reactive scenes — one Zigbee strip that sets the mood across the whole room.
- Colours
- 16MColours
- RGBIC segments
- 10RGBIC segments
- Tunable white
- 2700–6500KTunable white
- Extendable length
- 10 mExtendable length
- Dust & splash rated
- IP44Dust & splash rated
Zigbee 3.0: the T1 doubles as a mesh repeater, strengthening your Aqara network instead of congesting Wi-Fi — with low idle power draw.
16 million colours, plus warm-to-cool white
RGB CCT means the T1 handles daily lighting and mood lighting on one strip — glow through 16 million hues, or tune clean white from a cosy 2700K to a crisp 6500K. With HomeKit Adaptive Lighting, the whites shift through the day on their own.
- RGBIC, 10 segments — each of the strip's 10 segments takes its own colour, dimming and effect, so a single run can light different corners at once
- Gradient effects — flow rainbow and gradient scenes across the strip — RGBIC effects apply to colour scenes, not to tunable white
Static, dynamic, synced to the beat
Pick from built-in static and dynamic effects — rainbow, flash and more — then fine-tune colour, brightness and speed in the Aqara Home app. A built-in microphone drives music-sync mode with no phone nearby, and any scene can fire automatically as part of a routine.
Cut it, extend it, run it outdoors
The 2 m strip cuts cleanly at 20 cm marks and extends up to 10 m with 1 m Extension Kits, so it fits the shelf, stair or bench you have in mind. An IP44 rating shrugs off dust and splashes, and power-off memory restores your last setting after an outage.
- Extend to 10 m — add 1 m Extension Kits (sold separately); this pack includes the 2 m strip, controller and adapter
- Cut every 20 cm — re-join with third-party 5-pin connectors and 5-core wire — re-attached sections are no longer waterproof
Tech specifications
| Model | LEDS-K01 / LEDS-K02 / RLS-K01D / RLS-K02D |
|---|---|
| Light source | 30 × 5050 RGB + 60 × 2835 white LEDs, 5 W/m |
| Colour | RGB + tunable white 2700K–6500K |
| Addressable segments | 10 (RGBIC) |
| Wireless protocol | Zigbee (2405–2475 MHz, ≤13 dBm), with repeater function |
| Strip length | 2 m included, extendable to 10 m |
| Cut interval | Every 20 cm (7.9") |
| Strip dimensions | 2000 × 12 × 2.8 mm |
| Water & dust rating | IP44 |
| Power adapter | Input 100–240V ~50/60Hz · Output 24V DC 1.5A |
| Strip power input | 24V DC ≤0.25 A/m |
| Working temperature | -10°C to 40°C |
| Operating humidity | 0–95% RH, non-condensing |
| Extension Kit | RLSE-K01D — 1 m strip, 24V DC ≤0.25 A/m (sold separately) |
In the box: 2 m light strip, 3-pin (Type G) power adapter, controller and user manual — the Type G plug fits Singapore sockets directly. Matter and HomeKit control require a compatible Aqara hub. Extension Kits, and the 5-pin connectors needed to re-join a cut strip, are sold separately.
