Aqara Smart Roller Shade Driver E1
- Zigbee
Requires a compatible Aqara Zigbee hub.
$100.00
In stockAn easy-to-install, battery-operated retrofit driver that can motorize your existing roller shades. Works by operating the beaded cord.
- Secure card payment
- Visa & Mastercard
- Official Singapore sets
- Free Singapore delivery
- Local warranty
- GST-inclusive prices
Category: Smart Curtains & Blinds
Motorise the shades you already own.
A retrofit driver that clips onto your existing beaded cord — no new blinds, no dedicated wiring. Set it once and let your shades run themselves.
- Retrofit install
- 5 minRetrofit install
- Battery per charge
- 2 monthsBattery per charge
- Beaded-cord adapters
- 4Beaded-cord adapters
- Local & stable
- Zigbee 3.0Local & stable
- Recharge or wired power
- USB-CRecharge or wired power
A five-minute retrofit, not a renovation
Screw the driver to the wall, snap on the matching adapter, and thread in the beaded cord — that's the whole job. It drives your existing roller shade by pulling the same chain you do today, so there's nothing to re-measure and no shades to replace.
- Four adapters in the box — fits most plastic and metal beaded chains from 3 to 6 mm thick
- No electrician needed — wall-mount with the included screws or the adhesive pad
- Works across shade types — designed for common roll-type blinds in a range of sizes
Shades that follow your day
Build a daily or weekly schedule in the Aqara Home app and the shade runs itself — up with the morning, down against the afternoon glare, closed at bedtime. Pair it with an Aqara hub and sensors to react to real conditions, not just the clock.
- Time-based routines — e.g. open to 80% at 7:30am, drop to 10% at 9:00am, fully open by evening
- Sunlight-aware — with a light-sensing hub, the shade can lower automatically when the afternoon sun turns harsh
- Presets you choose — save your favourite open and closed levels and switch between them in a tap
Tap, ask, or automate
Run it straight from the on-device buttons, the Aqara Home app, a wireless button like the Mini Switch, or your voice. Charge the built-in battery for around two months of use, or leave it plugged into USB-C for constant power — your choice.
- One-button operation — map open, stop and close to a single Aqara wireless button
- Voice control — works with Apple Home, Alexa and Google Home through a compatible hub
- Wired or wireless — USB-C lets you recharge every couple of months or run it permanently powered
Tech specifications
| Model | RSD-M01 |
|---|---|
| Wireless protocol | Zigbee 3.0 (IEEE 802.15.4) |
| Cord compatibility | Beaded chain, 3–6 mm (plastic or metal beads) |
| Power input | 5V ⎓ 1A (USB-C) |
| Total power consumption | 5 W |
| Battery | Built-in lithium (non-replaceable) |
| Battery life | Approx. 2 months per charge |
| Dimensions | 42 × 37 × 165 mm |
| Operating temperature | -10°C to 55°C |
| Operating humidity | 0–95% RH, non-condensing |
| In the box | Roller Shade Driver E1 × 1, Screw × 2, Expansion Tube × 2, Double-sided Adhesive Tape × 1, Spare Rotating Plate × 3, USB-C to USB-A Cable × 1 |
Requires a compatible Aqara Zigbee hub (sold separately) — it does not connect on its own. Third-party ecosystem and voice-assistant support (Apple Home, Alexa, Google Home, IFTTT) is provided through the global server of the Aqara Home app; feature availability may differ in Singapore. Only beaded-chain roller shades are supported. Battery figure is based on one full up-and-down cycle per day on a 1.8 × 1.8 m shade; heavier shades and more frequent use will shorten it.
Related products
Aqara Curtain Controller C3
$369.00