High performance cutting-off wheel with low thermal load and minimal burr formation.
Additional Downloads
Relative Klingspor product ratings retained from the source catalogue. A filled segment represents one point on the stated scale.
Angle Grinder
| Diameter x Width x Bore (mm) | Max. operating speed | Max. RPM | Form | Units / box |
|---|---|---|---|---|
| 115 x 1 x 22.23 | 80 m/s | 13,300 | Flat | 25 |
Angle Grinder
Sizes and pack quantities above were carried over from the legacy catalogue. Contact PFE to confirm current availability and the correct article for your application.
Stainless steel, steel, NF metals
Long service life and high abrasive performance. Very good adaptation to radiuses and contours due to highly flexible cotton backing. Ideal for hard grinding of brass fittings and other molded parts.
For hard and difficult-to-machine materials under high stress. Can be used wet or dry.
Fibre disc with zirconia alumina grains for self-sharpening effect, and for high aggressiveness on steel and stainless steel. Suitable for rough grinding work.
High performance cutting-off wheel that is free of iron, sulphur and chlorine. Can achieve very short cutting times with minimal burr formation. Low thermal load.
