- Professional quality with very high bond strength
- Foaming penetration action to fill bond cavities and porous substrates
- D4 water resistance (DIN EN 204); suitable for wet wood types
- Suitable for almost all materials, especially suited for timber and wood
Soudal
Soudal Pro 40P PU Adhesive
Soudal PRO 40 P is a one-component, unfilled, ready-to-use polyurethane adhesive classified D4 under EN 204. It cures quickly with a foaming penetration action to fill bond cavities and pores for maximum adhesion. It can be used on damp wood and can attain the D4 standard of water resistance based on the DIN EN 204 standard.
Additional Downloads
Specifications
| Packaging | 750 g bottles, 6 bottles / carton |
|---|---|
| Colour | Brown |
Features & Applications
Features
- Easy application with newly redesigned bottle cap applicator
- Easy to tool
- Professional quality
- Powerful bond
- Foaming penetration action to fill bond cavities
- D4 water resistance (DIN EN 204)
- Suitable for wet wood types
Applications
- Interior applications which are exposed to high relative humidity
- Exterior applications which are exposed to direct weather influence
- Bonding of windows and door frames (also corner connections) which need to meet class D4 according to EN204
- Bonding of wooden construction elements
Application Method
Method: Apply the adhesive by means of a brush or notched trowel to one of the substrates. Join the parts together within 15 minutes and clamp for at least 3 hours. Pressing the materials during curing is necessary to reach the highest possible end strength.
Suitable Substrates
Various porous and non-porous surfaces such as wood, concrete, stone, and other materials commonly used in construction. Not suitable for PE and PP. As the adhesive cures on exposure to moisture in the air or the material, a light spray of water to moisten the surface can accelerate the bonding process and filling character.
Related Products
Soudal
Soudal Fix All Xtreme Power
The most extreme of the Fix All Range, you can count on this adhesive to fulfill all your bonding requirements in the most simple ways. With an initial tack of 400 kg / m², you just apply and press, and the extreme tack ensures it holds up immediately without sliding.
Soudal
Soudal Multibond SMX50
SEAL & STICK anything, in almost any condition! Multibond SMX50 features very high adhesive strength that lasts through rain, water, snow, and sun – with no decline in performance. Its elasticity also ensures its bond through movements or vibrations, where other rigid adhesives will crack. Multibond SMX50 is packed in economical 600 ml sausages for maximum savings.
Soudal
Soudal Chemical Anchor CA1400
Chemical Anchor CA1400 is a high-performance, universally applicable 2-component anchoring resin for the tension-free securing of anchoring rods, studs, reinforcing bars, threaded collars, profiles etc. in structural and high-load applications, in both hollow and solid materials.
Soudal
Soudal Soudabond Easy PU Foam Adhesive
SOUDABOND EASY GUN is a one-component PU foam adhesive for permanent bonding of insulation panels, building boards, and plasterboard in building and construction. Soudabond Easy’s 750g of pre-polymer expands to 240 linear metres of adhesive beads, allowing a single can to bond up to 14 m² of area.