High performance cutting-off wheel that is free of iron, sulphur and chlorine. Can achieve very short cutting times with minimal burr formation. Low thermal load.
Additional Downloads
Relative Klingspor product ratings retained from the source catalogue. A filled segment represents one point on the stated scale.
Angle Grinder
| Diameter x Width x Bore (mm) | Max. operating speed | Max. RPM | Form | Units / box |
|---|---|---|---|---|
| 100 x 1 x 16 | 80 m/s | 13,300 | Flat | 25 |
Angle Grinder
Sizes and pack quantities above were carried over from the legacy catalogue. Contact PFE to confirm current availability and the correct article for your application.
Stainless steel, steel
Tear-resistant, high performance belt with especially high aggressiveness and abrasive performance due to active abrasive substances. Especially suitable for stainless steel, but also for steel and metal in general.
Abrasive mop disc for good stock removal rate on steel and NF metals. Flaps with aggressive aluminium oxide - flat design especially suited for surface grinding. Suitable for use on angle grinders of all performance classes
Good removal rate for working on wood under high stress. Minimal clogging and long service life due to ACT recipe and antistatic properties.
High quality abrasive belt with high removal rate in metalworking and woodworking, and very good adaptation to radiuses and contours due to highly flexible cotton backing.
