Find current products by application or technical characteristic
Use this index to find catalogue products by application or technical property. Each grouping is a starting point: confirm the current product data, substrate compatibility and any required test classification before specification.
Acetoxy-cure silicones release acetic acid as they cure and are commonly used on compatible non-porous substrates. Their curing chemistry can produce a vinegar-like odour and may be unsuitable for sensitive…
View 2 matching productsFire-rated sealants and foams are products with test documentation for defined fire-resistance applications. Reports distinguish properties such as integrity and insulation and apply only to the tested joint or penetration…
View 4 matching productsProducts in this group have documentation relevant to selected food-area or food-contact applications. The applicable approval, test method, contact conditions and curing requirements differ by product. Do not infer universal…
View 4 matching productsProducts in this group are listed by the legacy catalogue for adhesion to selected timber or wood-based substrates. Coatings, moisture, species and surface condition can materially change adhesion. Test unfamiliar…
View 16 matching productsHigh-elasticity sealants and adhesives can accommodate greater joint movement before failure than more rigid products. This is often described through movement capability or modulus, with low-modulus sealants generally requiring less…
View 10 matching productsHigh-temperature products are formulated for service above the range of general-purpose sealants. Published limits vary substantially by chemistry and may distinguish continuous from short-term exposure. Heat resistance is not the…
View 4 matching productsLow-odour products reduce strong odour during application compared with many acetoxy-cure or solvent-based materials. This can improve user comfort in occupied or confined areas. Low odour does not remove the…
View 16 matching productsModerately elastic products provide some movement accommodation while retaining a firmer bond or seal. They can suit bonding work and joints with limited movement or vibration. The appropriate modulus and…
View 5 matching productsNeutral-cure silicones use a curing system that is generally less corrosive and lower in odour than acetoxy-cure silicone. Suitability still varies by formulation and substrate. Confirm adhesion, primer requirements, movement…
View 2 matching productsNon-staining products are intended to reduce visible migration or edge staining on compatible porous materials. Natural stone and other sensitive substrates can react differently to sealant components, primers and site…
View 8 matching productsPaintable sealants and adhesives can accept compatible coatings after the required curing period. Many are intended for water-based paints, but paint composition, flexibility and drying conditions affect the result. Test…
View 19 matching productsFoam guns and cleaners support the controlled application and maintenance of compatible polyurethane foam systems. Applicators, valves and cleaning methods are product-specific. Clean equipment at the interval and with the…
View 2 matching productsSanitary sealants are formulated for joints in bathrooms, kitchens and other intermittently wet areas. Selected products contain agents intended to resist mould growth on the cured sealant. Sanitary formulation does…
View 5 matching productsStraw-type polyurethane foams are dispensed through an adapter tube supplied with the can. They are convenient for occasional filling and insulating work where the selected foam is suitable. Control and…
View 2 matching productsThese products are intended for bonding applications that require high initial or final adhesive strength across their supported substrates. Strength figures, cure times and loading limits are product- and test-specific.…
View 7 matching productsSelected hybrid-polymer adhesives can bond to damp surfaces and, for applications permitted by their technical data, can be applied under water. Water, contamination and movement can reduce initial adhesion and…
View 6 matching products