25 pieces delivered in each Kronenflex® box for long-lasting high performance and moisture protection.
Klingspor
Klingspor A980TZ Special Cutting-off Wheel
Premier-quality cutting-off wheel which can achieve very short cutting times and very precise and clean cuts. Minimal burr formation, minimising finish-machining. Low thermal load. Free of iron, sulphur and chlorine.
Additional Downloads
Performance Ratings
Relative Klingspor product ratings retained from the source catalogue. A filled segment represents one point on the stated scale.
- Aggression
- 5 / 7
- Service Life
- 6 / 7
- Bond
- 6 / 7
Suitable Equipment and Methods
-
Angle Grinder
Related Product Guides
Detailed Product Information
Articles and Sizes
| Diameter x Width x Bore (mm) | Max. operating speed | Max. RPM | Form | Units / box |
|---|---|---|---|---|
| 115 x 0.8 x 22.23 | 80 m/s | 13,300 | Depressed | 25 |
| 125 x 0.8 x 22.23 | 80 m/s | 12,200 | Depressed | 25 |
Suitable equipment
Angle Grinder
Sizes and pack quantities above were carried over from the legacy catalogue. Contact PFE to confirm current availability and the correct article for your application.
Features & Applications
Suitable For
Stainless steel, steel, NF metals
Related Products
Klingspor
Klingspor PS 28 F Abrasive Belt
Universal belt for general woodworking, especially soft wood. For general-purpose applications.
Klingspor
Klingspor CS 910 Y ACT Abrasive Belt
Continuously aggressive abrasive performance, with long service life due to ceramic grit - High performance abrasive belt for stainless steel finish grinding - Prevents heat tinting on stainless steel - No clogging/glazing when used on titanium and high-alloy steels
Klingspor
Klingspor SMT 527 Abrasive Mop Disc
Abrasive mop disc for good stock removal rate on steel and NF metals. Flaps with aggressive aluminium oxide - flat design especially suited for surface grinding. Suitable for use on angle grinders of all performance classes
Klingspor
Klingspor CS 333 JF Abrasive Belt
Long service life and high abrasive performance. Very good adaptation to radiuses and contours due to highly flexible cotton backing. Ideal for hard grinding of brass fittings and other molded parts.