Pereseal 702 High Performance Acrylic Sealant
PERESEAL 702 is a high performance, pure acrylic sealant that is excellent for sealing of aluminium door and window frames and air conditioning and HVAC ducts and systems. It can also be used for general purpose interior and exterior caulking in architectural applications where slight or moderate joint movement is anticipated.
-
Acrylic emulsion
-
Sound dampening
-
Paintable
Packaging
300 ml cartridges, 20 cartridges / carton
330 ml sausages, 20 sausages / carton
400 ml sausages, 20 sausages / carton
Colours available
Grey, white
More Info
FEATURES
- Low VOC – qualifies for LEED IEQc4.1 : Low-Emitting Materials – Adhesives and Sealants (tested by TÜV SÜD PSB)
- Tested and conforms to ASTM C920 Standard Specification for Elastomeric Joint Sealants
- Very easy to apply
- Non-staining
- Good weather resistance
- UV radiation resistant
- Good adhesion to most porous building materials without the use of a primer
- Can be applied on damp (not wet) surfaces
- Non-toxic, non-irritating and environmentally friendly
- Permanent colour
- Paintable
APPLICATIONS
- Sealing of air-conditioning and HVAC ducts and systems
- Sealing of aluminium window and door frames
- Grouting tiles
- Repairing joints
- Sealing cracks
- Interior and exterior architectural caulking
TYPICAL SUBSTRATES
- Glass
- Metal
- Steel
- Ceramic
- All usual building materials
APPLICATION METHOD
- Application Method: Applicator gun (hand or pneumatic)
- Application Temperature: +1 ºC to +30 ºC
- Clean with: Water immediately after application
- Finish with: Soapy water solution before skin formation
- Repair with: PERESEAL 702
SURFACE PREPARATION
- Substrate: All usual surfaces
- State of Substrate: Clean, dry, free of grease
- No primer required for aluminium, air-conditioner ducting materials, and most porous surfaces of building materials
JOINT SIZE
- Min width: 5mm
- Max width: 50mm
- Min depth: 5mm
- Recommendation: 2 x depth = width
REMARKS
The sealant must be protected from water for 24 hours after application. It must not be used on areas where it will be constantly submerged in liquids.