Abrasive mop disc for good stock removal rate on steel and NF metals. Flaps with aggressive aluminium oxide – flat design especially suited for surface grinding. Suitable for use on angle grinders of all performance classes
Klingspor
Klingspor SMT 527 Abrasive Mop Disc
Abrasive mop disc for good stock removal rate on steel and NF metals. Flaps with aggressive aluminium oxide - flat design especially suited for surface grinding. Suitable for use on angle grinders of all performance classes
Additional Downloads
Specifications
| Grain | Aluminium oxide |
|---|---|
| Design | Flat |
| Backing plate | Glass fibre |
| Suitable for | Steel, NF metals, wood |
Available Grit Sizes
FEPA P-grade numbers indicate abrasive particle size; lower numbers are coarser. Availability can vary by roll width and order quantity, so confirm the required combination when requesting a quotation.
- P40
- P60
- P80
- P100
- P120
Performance Ratings
Relative Klingspor product ratings retained from the source catalogue. A filled segment represents one point on the stated scale.
- Aggression
- 4 / 7
- Service Life
- 4 / 7
Suitable Equipment and Methods
-
Angle Grinder
Product Visual Information
Optimized Performance
Sustained High Performance
Extraordinary Stability
Tried-and-tested Safety
Related Product Guides
Detailed Product Information
Articles and Sizes
| Diameter x Bore (mm) | Grit | Form | Max. operating speed | Max. RPM |
|---|---|---|---|---|
| 100 x 16 | 40 | Flat | 80 m/s | 15,300 |
| 100 x 16 | 60 | Flat | 80 m/s | 15,300 |
| 100 x 16 | 80 | Flat | 80 m/s | 15,300 |
| 100 x 16 | 100 | Flat | 80 m/s | 15,300 |
| 100 x 16 | 120 | Flat | 80 m/s | 15,300 |
Sizes and pack quantities above were carried over from the legacy catalogue. Contact PFE to confirm current availability and the correct article for your application.
Related Products
Klingspor
Klingspor SMT 624 Supra Abrasive Mop Disc
Aggressive stock removal rate and comfortable grinding behaviour. For universal use in demanding grinding work on steel and stainless steel. Optimal removal rate when used on high-power angle grinders
Klingspor
Klingspor CS 910 Y ACT Abrasive Belt
Continuously aggressive abrasive performance, with long service life due to ceramic grit - High performance abrasive belt for stainless steel finish grinding - Prevents heat tinting on stainless steel - No clogging/glazing when used on titanium and high-alloy steels
Klingspor
Klingspor CS 311 YX ACT Abrasive Belt
Good removal rate for working on wood under high stress. Minimal clogging and long service life due to ACT recipe and antistatic properties.
Klingspor
Klingspor A24R Supra Grinding Disc
With optimized recipe for use on steel - Also suitable for use on stainless steel - Large product range