Cutting-off wheel for railway rails, with blotter. Very fast cutting. For use on petrol driven cutting-off machines with a cutting speed of 100 m/s and clamping device.
Additional Downloads
Relative Klingspor product ratings retained from the source catalogue. A filled segment represents one point on the stated scale.
Petrol Powered Cutter with Clamping Device
| Diameter x Width x Bore (mm) | Max. operating speed | Max. RPM | Form | Units / box |
|---|---|---|---|---|
| 350 x 4 x 25.4 | 100 m/s | 5,500 | Flat | 10 |
Petrol Powered Cutter with Clamping Device
Sizes and pack quantities above were carried over from the legacy catalogue. Contact PFE to confirm current availability and the correct article for your application.
Steel
Premier-quality cutting-off wheel with optimised bonding for considerably longer service life. Very short cutting times, low thermal load, and low burr formation. Free of iron, sulphur and chlorine. For diverse applications.
Cutting-off wheel for universal use on all rail types, with very fast cutting performance. Maximum aggressiveness and service life due to hardened special aluminum oxide - For use on gas powered cutting-off machines with a cutting speed of 100 m/s and clamping device
Abrasive paper with open coating and antistatic properties to prevent premature clogging. Sturdy, tear-resistant backing for every kind of wood, particularly soft and high-resin woods, such as spruce and pine.
Good removal rate for working on wood under high stress. Minimal clogging and long service life due to ACT recipe and antistatic properties.
