Standard disc for use with compatible angle grinders. For universal use in metal-working.
Additional Downloads
Relative Klingspor product ratings retained from the source catalogue. A filled segment represents one point on the stated scale.
Angle Grinder
| Diameter x Width x Bore (mm) | Max. operating speed | Max. RPM | Form | Units / box |
|---|---|---|---|---|
| 100 x 6 x 16 | 80 m/s | 15300 | Depressed | 10 |
| 125 x 6 x 22.23 | 80 m/s | 12200 | Depressed | 10 |
| 180 x 6 x 22.23 | 80 m/s | 8500 | Depressed | 10 |
| 230 x 6 x 22.23 | 80 m/s | 6600 | Depressed | 10 |
Angle Grinder
Sizes and pack quantities above were carried over from the legacy catalogue. Contact PFE to confirm current availability and the correct article for your application.
Metals
Abrasive paper with open coating and antistatic properties to prevent premature clogging. Sturdy, tear-resistant backing for every kind of wood, particularly soft and high-resin woods, such as spruce and pine.
Small abrasive mop equipped with a fixing spindle and high quality non-woven flaps for creating a matt or satin finish. Even finish throughout the entire service life.
Premier-quality cutting-off wheel which can achieve very short cutting times and very precise and clean cuts. Minimal burr formation, minimising finish-machining. Low thermal load. Free of iron, sulphur and chlorine.
Highly flexible abrasive cloth with high abrasive performance, and a fine surface scratch pattern for strongly profiled workpieces. Very good adaptation to contours, tight radiuses, and profiles due to highly flexible cotton cloth. Suitable for smooth surfaces in the metal and wood processing industries.
