Features
- Low VOC – qualifies for LEED IEQc4.1 : Low-Emitting Materials – Adhesives and Sealants (tested by TÜV SÜD PSB)
- Tested and conforms to ASTM C920 Standard Specification for Elastomeric Joint Sealants
- Very easy to apply
- Non-staining
- Good weather resistance
- UV radiation resistant
- Good adhesion to most porous building materials without the use of a primer
- Can be applied on damp (not wet) surfaces
- Non-toxic, non-irritating and environmentally friendly
- Permanent colour
- Paintable
Applications
- Sealing of air-conditioning and HVAC ducts and systems
- Sealing of aluminium window and door frames
- Grouting tiles
- Repairing joints
- Sealing cracks
- Interior and exterior architectural caulking
Typical Substrates
- Glass
- Metal
- Steel
- Ceramic
- All usual building materials
Application Method
- Application Method: Applicator gun (hand or pneumatic)
- Application Temperature: +1 ºC to +30 ºC
- Clean with: Water immediately after application
- Finish with: Soapy water solution before skin formation
- Repair with: PERESEAL 702
Surface Preparation
- Substrate: All usual surfaces
- State of Substrate: Clean, dry, free of grease
- No primer required for aluminium, air-conditioner ducting materials, and most porous surfaces of building materials
Joint Size
- Min width: 5mm
- Max width: 50mm
- Min depth: 5mm
- Recommendation: 2 x depth = width
Remarks
The sealant must be protected from water for 24 hours after application. It must not be used on areas where it will be constantly submerged in liquids.
