Soudal Soudabond Easy PU Foam Adhesive

Soudal Soudabond Easy PU Foam Adhesive

One-component PU foam adhesive for insulation panels, building boards and plasterboard. One can lays 240 linear metres of bead, enough for up to 14 m².

Soudabond Easy Gun gives permanent bonds in building and construction. Each can holds 750 g of pre-polymer.

Needs a Soudal PU foam gun.

  • Cuts working time by up to 30% compared with conventional methods
  • Cuts adhesive cost by 76% compared with typical construction adhesive
  • One can covers up to 14 m² of insulation
  • One can replaces a 25 kg bag of masonry or AAC adhesive
  • Precise application with a foam gun, no mixing

The data sheet has the full substrate list, limits and test ratings. Not sure it fits your job? Ask us.

Need a price or a second opinion?

Tell us the quantity and what you're using it on. We'll reply with price, availability and anything you should know.

Ask about this product

Specifications

Packaging 750 ml pressurised aerosol cans, 12 cans / carton
Colour Orange

Features and applications

Features

  • Clean, efficient, economical permanent bonding
  • High initial bond strength
  • Precise application and accurate trigger control keep waste down
  • Suitable for vertical applications
  • Insulating (0.035 W/m.K), so it adds to the performance of insulation panels
  • Saves space and weight compared with mortars and other adhesives
  • Fast curing: carry on working about 1 hour after application

Applications

  • Permanent bonding of panels, walls and blocks
  • Polystyrene (EPS + XPS), polyurethane (PUR/PIR) and phenol resin foam insulation panels for flat roofs, perimeters and facades
  • Gypsum plaster or fibre boards in dry lining
  • Non-load-bearing walls such as partition or screen walls
  • Concrete precision blocks and bricks (aerated concrete, gypsum etc.)

Application instructions

  • Needs a suitable PU foam gun
  • Shake the can upside down for at least 30 seconds before use
  • Set the gun to give beads about 3 cm wide
  • Run a bead around the panel perimeter, then fill the inside with a zig-zag
  • Join the surfaces within 7 minutes and press the panel in place for 30 to 60 seconds, depending on weight and conditions
  • Always store the can valve up
  • Between jobs, leave the gun on the can and tighten the nozzle screw. How long it keeps this way varies and isn’t guaranteed
  • Full instructions are in the technical data sheet

Video