- Water-tight, water-vapour-tight, and gas-tight up to 3 bar
- Water impermeable
- Swells in contact with water – to prevent leaking
- Immediate seal of leaks
- Does not harden
Soudal
Soudal Soudapack WST
SOUDAPACK WST is a one-component, solvent-free, hydro-swelling sealant to prevent water leaks in the inside of pipes. Soudapack WST does not cure but remains permanently flexible, through which additional cables or pipes can be carried through at all times.
Additional Downloads
Specifications
| Packaging | 310 ml cartridges, 12 cartridges / carton |
|---|---|
| Colour | Yellow |
Features & Applications
Features
- Watertight up to 3 bar
- Gas-tight up to 3 bar
- Permanently flexible
- Immediate seal of leaks
- No adhesive layer needed
- No vapours, no solvents
- Swells in contact with water
- Water-impermeable
- Does not harden
- Indoor emission level of A+ (very low risk, very low VOC)
- Easy to apply with standard caulking gun
Applications
- Water-tight and gas-tight sealing in and around pipelines and cable penetrations
- Sealing against groundwater and surface water ingress around pipes and cables through wall inlets below ground level
- Sealing of wall penetrations inside building
- Hermetic sealing of horizontal pipe and cable wall inlets
Application Instructions
- In the case of large spaces between pipe and inner walls, back fillings may be required. Use back paddings to create the application depth of minimum 12 cm.
- Soudapack WST should be used on the inside of cable/pipe penetrations for flexible sealing.
- For watertight and gastight seals around (and on the outside of) cable and pipe penetrations, Soudal Aquaswell is recommended.
- A top layer of a water-resistant mortar (Soudaplug ST) to encapsulate Soudapack WST is recommend.
Video
Related Products
Soudal
Soudal Chemical Anchor CA1400
Chemical Anchor CA1400 is a high-performance, universally applicable 2-component anchoring resin for the tension-free securing of anchoring rods, studs, reinforcing bars, threaded collars, profiles etc. in structural and high-load applications, in both hollow and solid materials.
Pereseal
Pereseal N Neutral Seal Weatherproof Silicone
PERESEAL N Weatherproof Neutral Seal Silicone is a top quality silicone sealant with a neutral, odourless curing system. It cures into a permanently flexible barrier against water, most chemicals, and weather elements, with sufficient elasticity for movements of joints and expansion of substrates. Adheres to common building surfaces and is intended for interior and exterior applications.
Soudal
Soudal Firecement HT 1500°C Sealant
Soudal Firecement HT is a sealing paste based on sodium silicate that can be used in conditions where temperatures can get extremely high - up to 1500°C. It is single component and easy to use, and cures to form a hard seal. For sealing applications in ovens, fireplaces and other high-temperature areas.
Pereseal
Pereseal AF Bathroom & Kitchen Anti-fungal Silicone
PERESEAL AF Bathroom and Kitchen Silicone Sealant is a first-grade anti-fungal neutral silicone sealant specially formulated for use in hot, humid conditions such as bathrooms and kitchens. Cures to form a flexible, waterproof seal, and contains fungicides for use in sanitary applications where protection against mould, mildew, and fungus is required.