Continuously aggressive abrasive performance, with long service life due to ceramic grit – High performance abrasive belt for stainless steel finish grinding – Prevents heat tinting on stainless steel – No clogging/glazing when used on titanium and high-alloy steels
Klingspor
Klingspor CS 910 Y ACT Abrasive Belt
Continuously aggressive abrasive performance, with long service life due to ceramic grit - High performance abrasive belt for stainless steel finish grinding - Prevents heat tinting on stainless steel - No clogging/glazing when used on titanium and high-alloy steels
Additional Downloads
Specifications
| Grain | Ceramic aluminium oxide |
|---|---|
| Bonding Agent | Resin |
| Coating | Close |
| Backing | Y-polyester |
| Suitable for | Stainless steel |
Available Grit Sizes
FEPA P-grade numbers indicate abrasive particle size; lower numbers are coarser. Availability can vary by roll width and order quantity, so confirm the required combination when requesting a quotation.
- P24
- P36
- P40
- P50
- P60
- P80
Suitable Equipment and Methods
-
Back Stand Grinding Machine
Custom abrasive conversion
PFE provides abrasive belt and roll conversion for Klingspor abrasives and can produce specified widths and dimensions. Contact PFE to confirm the material, grit, dimensions, minimum quantity and current availability.
Request a quotationRelated Product Guides
Detailed Product Information
Available belt joints
F1, F2, F4G
Made-to-size belt service
PFE converts Klingspor abrasive belts and rolls locally and can supply belts to specified dimensions. Joint construction can be selected for the machine and application; see the Abrasive Belt Joints guide.
Suitable equipment
Back Stand Grinding Machine
Sizes and pack quantities above were carried over from the legacy catalogue. Contact PFE to confirm current availability and the correct article for your application.
Related Products
Klingspor
Klingspor PS 11 Abrasive Sheets
High-quality, flexible, and waterproof abrasive paper sheets for hand sanding. Suitable for auto repair and painting. For hard and tough surfaces. Good adaptation and high stability. Can be used for both wet and dry sanding.
Klingspor
Klingspor PS 23 F Abrasive Belt
Open coating and antistatic properties prevent premature clogging of the belt with grinding dust. Sturdy, tear-resistant backing for all kinds of wood, particularly soft and high-resin woods, such as spruce or pine.
Klingspor
Klingspor T24AX Special Railway Cutting-off Wheel
Cutting-off wheel for universal use on all rail types, with very fast cutting performance. Maximum aggressiveness and service life due to hardened special aluminum oxide - For use on gas powered cutting-off machines with a cutting speed of 100 m/s and clamping device
Klingspor
Klingspor A60 Extra Cutting-off Wheel
Cutting-off wheel with very good price-performance ratio. Minimal burr formation. Low thermal load.